>>> show dev
VMS/VMB ULTRIX ADDR DEVTYP NUMBYTES RM/FX WP DEVNAM REV
------- ------ -------- ------ -------- ----- -- ------ ---
ESA0 SE0 08-00-2B-27-DA-A1
DKA0 RZ0 A/0/0/00 DISK 121 MB FX RZ23L 2528
...HostID.... A/6 INITR
DKB400 RZ12 B/4/0/00 RODISK 426 MB RM CD-R55S1.0L
...HostID.... B/6 INITR
>>> b dkb400
-DKB400
OpenVMS VAX Version X5ZX-C3L Major version id = 1 Minor version id = 0
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM)
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 01.01.1994 18:00
invalid date/time
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 10-JAN-1995 18:00
Configuring devices . . .
Available device DKB400: device type Generic_DK
Available device DKA0: device type RZ23L
%BACKUP-I-IDENT, Stand-alone BACKUP V6.1; the date is 10-JAN-1995 18:00:56.50
$
?02 EXT HLT
PC = 807DD74D
>>> b dkb400
-DKB400
Ultrixboot - V4.3 Sat Jul 25 09:51:02 EDT 1992
Loading (a)vmunix ...
Sizes:
text = 866104
data = 1279488
bss = 694512
Starting at 0x5219
ULTRIX V4.3 (Rev. 43) System #1: Fri Aug 7 14:24:08 EDT 1992
real mem = 12468224
avail mem = 7906304
Buffer configuration adjusted to run with small system page table
using 270 buffers containing 1246208 bytes of memory
KA41-A/B with an FPU
scsi0 at uba0 csr 0x200c0080 vec 0x1f8, ipl 0x14
rz0 at scsi0 slave 0 (RZ23L)
scsi1 at uba0 csr 0x200c0180 vec 0x1fc, ipl 0x14
rz12 at scsi1 slave 4 (RZxx)
ss0 at uba0 csr 0x200a0000 vec 0xc0, ipl 0x14
NO LOOPBACK
WARNING: clock gained 155 days -- CHECK AND RESET THE DATE!
*** STANDALONE ULTRIX ENVIRONMENT ***
If you select the BASIC Installation option from the list that follows,
the installation software creates file systems on default partitions on
your system disk and loads the mandatory ULTRIX software subsets.
If you require additional installation choices, select the ADVANCED
Installation option.
Select one of the following options:
1) BASIC Installation
2) ADVANCED Installation
3) System management
Enter your choice: 1
*** SYSTEM DISK SELECTION ***
The 'Guide to Installing ULTRIX' explains the following table
of system disk drives. Select one of the devices below to contain the
root file system:
SYSTEM DISK TABLE
Selection Device ULTRIX Device Controller Controller
Name Name Number Name Number
----------------------------------------------------------------------
1 RZ23L rz0 0 VS_SCSI 0
2 RZxx rz12 4 VS_SCSI 1
----------------------------------------------------------------------
Enter your choice: 1
You selected RZ23L, device number 0. Make sure this disk drive
is on line and write-enabled (if applicable to your disk drive), then
confirm your choice.
Use RZ23L, rz0, for your system disk? (y/n) []: y
NOTE: The RZ23L disk is not supported by itself as a system disk.
A second suitably sized disk is required to perform the installation.
Disk partitions must be carefully selected based on the usage infor-
mation in the Guide to Installing ULTRIX.
BASIC installations are not allowed using the RZ23L as a system
disk. The installation procedure will switch to ADVANCED installation
and continue.
The installation procedure now allocates the root file system on
partition 'a' of the system disk, rz0 RZ23L.
Making the root file system on rz0 RZ23L.
The installation procedure is now restoring the root file system to
partition 'a' of the system disk, rz0 RZ23L.
The installation procedure now checks the root file system on partition 'a'
of the system disk, rz0 RZ23L.
** /dev/rrz0a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
227 files, 6623 used, 8736 free (64 frags, 1084 blocks, 0.4% fragmentation)
*** BOOTSTRAP COMMAND SEQUENCE ***
Enter the following boot sequence at the console mode prompt
after the installation software halts the processor:
>>> b dka000
syncing disks... done
?06 HLT INST
PC = 8006C191
>>> b dka0
-DKA0
Ultrixboot - V4.3 Sat Jul 25 09:51:02 EDT 1992
Loading (a)vmunix ...
Sizes:
text = 1144820
data = 276480
bss = 1041200
Starting at 0x5219
ULTRIX V4.3 (Rev. 43) System #1: Fri Aug 7 13:52:57 EDT 1992
real mem = 12468224
avail mem = 8238080
Buffer configuration adjusted to run with small system page table
using 250 buffers containing 1246208 bytes of memory
KA41-A/B with an FPU
scsi0 at uba0 csr 0x200c0080 vec 0x1f8, ipl 0x14
rz0 at scsi0 slave 0 (RZ23L)
scsi1 at uba0 csr 0x200c0180 vec 0x1fc, ipl 0x14
rz12 at scsi1 slave 4 (RZxx)
ss0 at uba0 csr 0x200a0000 vec 0xc0, ipl 0x14
sh0 at uba0 csr 0x38000000 vec 0x44, ipl 0x14
ln0 at ibus0 csr 0x200e0000 vec 0x50, ipl 0x14
ln0: DEC LANCE Ethernet Interface, hardware address: 08:00:2b:27:da:a1
*** SYSTEM NAME SPECIFICATION ***
Select the name of your system using alphanumeric characters.
The first character must be a letter. For example, tinker.
Enter your system name: ultrix3100
You selected ultrix3100 as the name of your system.
Is this correct? (y/n) [y]: y
*** DATE AND TIME SPECIFICATION ***
The current date and time should be specified using the following
format:
yymmddhhmm
Use two digits for year (yy), month (mm), day (dd), hour (hh), and
minute (mm). Enter the time in 24-hour format. For example, 11:30
p.m. on May 3, 1991 would be entered as:
9105032330
Enter the date and time: 1703091812
*** TIME ZONE SELECTION ***
Select the time zone for your area, using the options listed in the
table below. You can also enter the number of hours (-12 to 12) in
time east of Greenwich.
Selection Time Zone
---------------------------------
e Eastern
c Central
m Mountain
p Pacific
g Greenwich
---------------------------------
Enter your choice: g
Does your area alternate between Daylight Savings and Standard
time? (y/n) [y]: y
Select your geographic area for Daylight Savings Time, using the
options in the table below.
Selection Geographic Area
--------------------------------
u USA
a Australia
e Eastern Europe
c Central Europe
w Western Europe
--------------------------------
Enter your choice [u]: e\e/
The current date and time is Mon Mar 9 18:12:19 WET 1970
*** SPECIFY THE SUPERUSER PASSWORD ***
The Guide to Installing ULTRIX instructs you on how to enter
the superuser password.
Changing password for root
Enter new password:
Verify:
*** FILE SYSTEM DEFAULT OPTION ***
The following table shows the default file system layout on RZ23L, rz0:
partition bottom top size overlap default
a 0 32767 32768 c root
b 32768 99457 66690 c swap, dump
g 99458 237587 138130 c,d,e,f,h /usr
If you choose the defaults, the var area will be allocated to /usr/var.
Do you want to choose the default file system layout? (y/n): y
Making the new file system for /usr on /dev/rrz0g RZ23L
This distribution media includes subsets for ULTRIX Worksystem
Software (UWS). A UWS license (on a workstation) or a UWS Server
License (on a timesharing machine or server) is required to install
these subsets.
Do you want to install ULTRIX Worksystem Software? y/n []: n
*** SUPPORTED SOFTWARE INSTALLATION ***
Working....Mon Mar 9 18:15:20 WET 1970
*** Enter Subset Selections ***
The following subsets are mandatory and will be installed automatically:
* Base System * Kernel Config Files
* TCP/IP Networking Utilities * Network File System Utilities
* Extended (Berkeley) Mailer
The subsets listed below are optional:
1) Printer Support Environment 2) RAND Mail Handler
3) Sys. Config. Mgmt. Program (SCAMP) 4) Communications Utilities
5) Unix-to-Unix Copy Facility 6) Maintenance Operations Protocol
7) Accounting Software 8) Kerberos Network Authentication
9) Enhanced Security Features 10) Prestoserve Utilities
11) System Exerciser Package 12) Bisynchronous Communications
13) Doc. Preparation for Ref. Pages 14) Doc. Preparation Extensions
15) Adobe Font Metric Files 16) Software Development Utilities
17) Source Code Control System 18) Internationalization Runtime Env.
19) Internationalization Dev. Env. 20) CDA Base System
21) CDA Software Dev Libraries 22) RPC Runtime Environment
23) RPC Development Environment 24) Pascal Development Package
25) VAX C/ULTRIX 26) Ref. Pages for Sys. Admin. & Users
27) Reference Pages for Programers 28) Programming Examples
29) All of the Above
30) None of the Above
31) Exit without installing subsets
Enter your choice(s): 30
Working....Mon Mar 9 18:16:44 WET 1970
You are installing the following subsets:
Base System Kernel Config Files
TCP/IP Networking Utilities Network File System Utilities
Extended (Berkeley) Mailer
Is this correct? (y/n): y
Base System (ULTBASE430)
Copying from /mnt/VAX/BASE (disk)
Working....Mon Mar 9 18:17:29 WET 1970
Working....Mon Mar 9 18:19:43 WET 1970
Working....Mon Mar 9 18:21:54 WET 1970
Verifying
Working....Mon Mar 9 18:22:55 WET 1970
Kernel Config Files (ULTBIN430)
Copying from /mnt/VAX/BASE (disk)
Working....Mon Mar 9 18:24:49 WET 1970
Working....Mon Mar 9 18:27:05 WET 1970
Verifying
Working....Mon Mar 9 18:28:46 WET 1970
TCP/IP Networking Utilities (ULTINET430)
Copying from /mnt/VAX/BASE (disk)
Working....Mon Mar 9 18:29:57 WET 1970
Verifying
Working....Mon Mar 9 18:31:27 WET 1970
Network File System Utilities (ULTNFS430)
Copying from /mnt/VAX/BASE (disk)
Working....Mon Mar 9 18:31:53 WET 1970
Verifying
Extended (Berkeley) Mailer (ULTUMAIL430)
Copying from /mnt/VAX/BASE (disk)
Verifying
The installation software has successfully installed the software
subsets.
Installing Upgrade subsets
The following subsets will be installed:
* Generic Kernel * Kernel Config Files UPGRADE
Do you wish to continue? (y/n):y
Generic Kernel (ULTGENVMUNIX431)
Copying from /mnt/VAX/BASE_UPGRADE (disk)
Working....Mon Mar 9 19:18:57 WET 1970
Verifying
Kernel Config Files UPGRADE (ULTBIN431)
Copying from /mnt/VAX/BASE_UPGRADE (disk)
Verifying
The installation procedure has successfully installed the Upgrade
subsets
*** CONFIGURATION FILE KERNEL OPTION SELECTION ***
Selection Kernel Option
---------------------------------------------------------------
1 Local Area Transport (LAT)
2 Bisynchronous Communication protocol (VAX only)
3 Computer Interconnect (CI) network
4 Diagnostic/Utilities Protocol (DUP)
5 ISO9660 File System Support (CDFS)
6 Ethernet Packet Filter
7 Enhanced Security Features
8 DECnet
9 All of the above
10 None of the above
----------------------------------------------------------------
Enter the selection number for each kernel option you want.
For example, 1 3 :: 1 2 3 4 5 8
You specified the following kernel options:
Local Area Transport (LAT)
Bisynchronous Communication protocol
Computer Interconnect (CI) network
Diagnostic/Utilities Protocol (DUP)
ISO9660 File System Support (CDFS)
DECnet
Is this correct? (y/n) [n]: y
*** SYSTEM CONFIGURATION PROCEDURE ***
Configuration file complete.
Do you want to edit the configuration file? (y/n) [n]:
*** PERFORMING SYSTEM CONFIGURATION ***
working ..... Mon Mar 9 19:23:17 WET 1970
working ..... Mon Mar 9 19:25:18 WET 1970
working ..... Mon Mar 9 19:27:19 WET 1970
working ..... Mon Mar 9 19:29:20 WET 1970
working ..... Mon Mar 9 19:31:21 WET 1970
*** DEVICE SPECIAL FILE CREATION ***
working ..... Mon Mar 9 19:32:50 WET 1970
*** SOFTWARE INSTALLATION PROCEDURE COMPLETE ***
The following files were created during the installation procedure:
/vmunix - customized kernel
/genvmunix - generic kernel
/usr/adm/install.log - installation log file
/usr/adm/install.FS.log - file systems log file
/usr/adm/install.DEV.log - special device log file
Enter the following boot sequence at the console mode prompt
after the installation software halts the processor:
>>> b dka000
syncing disks... done
?06 HLT INST
PC = 80095DDD
>>>
>>> b dka0
-DKA0
Ultrixboot - V4.3 Sat Jul 25 09:51:02 EDT 1992
Loading (a)vmunix ...
Sizes:
text = 742904
data = 106496
bss = 561924
Starting at 0x2c19
ULTRIX V4.3 (Rev. 44) System #1: Mon Mar 9 19:31:47 WET 1970
real mem = 12468224
avail mem = 8909824
using 304 buffers containing 1246208 bytes of memory
KA41-A/B with an FPU
scsi0 at uba0 csr 0x200c0080 vec 0x1f8, ipl 0x14
rz0 at scsi0 slave 0 (RZ23L)
scsi1 at uba0 csr 0x200c0180 vec 0x1fc, ipl 0x14
rz12 at scsi1 slave 4 (RZxx)
ss0 at uba0 csr 0x200a0000 vec 0xc0, ipl 0x14
sh0 at uba0 csr 0x38000000 vec 0x44, ipl 0x14
ln0 at ibus0 csr 0x200e0000 vec 0x50, ipl 0x14
ln0: DEC LANCE Ethernet Interface, hardware address: 08:00:2b:27:da:a1
WARNING: preposterous time in file system -- CHECK AND RESET THE DATE!
Sun Jul 4 13:00:01 WET DST 1976
Automatic reboot in progress...
/dev/rz0a: 604 files, 5878 used, 9481 free (89 frags, 1174 blocks, 0.6% fragmentation)
/dev/rrz0g: 2420 files, 26795 used, 37772 free (1084 frags, 4586 blocks, 1.7% fragmentation)
Warning Creating new license database
Warning creating new history file
check quotas: done.
savecore: checking for dump...dump does not exist
local daemons: syslog sendmail.
Removing remnant Opser files
preserving editor files
clearing /tmp
standard daemons: update cron accounting network snmpd.
start errlog daemon - elcsd
Sun Jul 4 13:00:55 WET DST 1976
ULTRIX V4.3 (Rev. 44) (ultrix3100)
Login incorrect
login: root
Password:
ULTRIX V4.3 (Rev. 44) System #1: Mon Mar 9 19:31:47 WET 1970
Digital Equipment Corporation
Nashua, New Hampshire
*** SOFTWARE INSTALLATION PROCEDURE COMPLETE ***
The following files were created during the installation procedure:
/vmunix - customized kernel
/genvmunix - generic kernel
/usr/adm/install.log - installation log file
/usr/adm/install.FS.log - file systems log file
/usr/adm/install.DEV.log - special device log file
#
Post Views: 262